BioHzrd wrote: โSat Oct 09, 2021 11:14 am Anyone with a home charger & smart meter or any other form of consumption monitor (emon pi/owl/Myenergie) happen to know or willing experimwnt and find out what sort of draw the Enyaq pulls when pre hearing the car ?
I'm just curious to know how much power is needed to heat/cool
Looks like that is going to vary depending upon ambient temp.
Just set mine to precondition 5 degrees above ambient and it was pulling 1.3 - 1.5kWh/h.
Increasing that to 10 degrees above ambient and it was fluctuating between 3.5 - 3.9 kWh/h
Colder mornings will drink more juice then, but looks likely a 7kWh home charger will be able to compensate
Anyone know if there is a level of battery it will stop allowing the preconditioning? - remember leaving my outlander in an airport car park with the preconditioning set daily and it drained the drive battery... not at all critical in that situation, but with an EV i hope there is something to stop it.