This explains a lot !! High Winter electric usage.

All Skoda Enyaq related discussions
Post Reply
zice
Posts: 147
Joined: Sat Dec 11, 2021 10:45 am

Post by zice »

RichR wrote: Thu Jan 20, 2022 4:36 pm
Out of interest, did you get the PTC and heat pump powers from measurements or do you have some documentation showing their ratings? I've got most of the workshop manual, but that doesn't give that kind of detail
yes, they found them in ID4 SSP documentation, not Skoda :) Same hardware, more detail.

User avatar
RichR
Posts: 1917
Joined: Thu Mar 11, 2021 11:53 am
Location: South end of North Yorkshire

Post by RichR »

Cool, I’ll go on a hunt for that 🙂 I much prefer official sources of information than just stuff that gets repeated on Facebook and Internet forums without citing sources.
Enyaq iV 80 Sportline, Energy Blue, Assisted Drive Plus, Infotainment Plus, Convenience Plus, Comfort Seat Plus, Transport Pack, Heat Pump, ME3.2, Built Nov 2021.
RockyDog
Posts: 12
Joined: Wed Dec 01, 2021 11:45 pm

Post by RockyDog »

One question re the 3.0 update - will it roll out using an OTA update or do we have to take it to the dealer to update?
Today's a gift, yesterday is history and tomorrow a mystery.

80 IV Suite, 125w, heatpump, convience pack, climate pack plus and drive sport basic
chillyboy123
Posts: 103
Joined: Mon Sep 27, 2021 6:58 am

Post by chillyboy123 »

I don’t think we have a definite answer to that one yet.

I would guess if your on 0792 at the moment you will probably have to go to the dealer.

Then all future updates via OTA

Going on what’s happening on the VW ID’s.
Enyaq iV60 - Race Blue with 20” Vega Wheels,
Assisted Drive Package +, Convenience Package +,
Parking Package Basic, Drive Package Basic,
Climate Package Basic, 120 kW charging,
Light and View Package Basic,

Upgraded to ME 3.0
zice
Posts: 147
Joined: Sat Dec 11, 2021 10:45 am

Post by zice »

RockyDog wrote: Sun Jan 23, 2022 1:33 pm One question re the 3.0 update - will it roll out using an OTA update or do we have to take it to the dealer to update?
dealer update, then after that will be OTA-enabled.
Perchede
Posts: 444
Joined: Tue Jun 15, 2021 12:09 pm

Post by Perchede »

Any idea when zice please?
IV60 Energy Blue, Loft, Matrix LED Lights, Drive assist+, Parking Assist+, HUD, Transport, Comfort, Tow bar. Schneider EV Link charger, 7000 Govt Grant - France, Delivered June 21.
zice
Posts: 147
Joined: Sat Dec 11, 2021 10:45 am

Post by zice »

my crystal ball says after Coupe launch which comes with 3.0 from factory
for existing cars, anytime from Q2 onwards.
Enyaqs produced from february onwards will come with 3.0 default.
should at least.....
mdiamantop
Posts: 24
Joined: Sun Jan 23, 2022 9:03 pm

Post by mdiamantop »

zice wrote: Thu Jan 20, 2022 3:46 pm change of plans. I don't need as urgently data from 0795, but rather looking for someone with a 11 or 22kW threephase wallbox. No OBD reader necessary. @chilliboy_123 what wallbox power you have?
I have a 22kw 3 phase wallbox. My car is Enyaq iv60, no heat pump.
I've set departure time a couple of times, the temp was around 0 oC, the charge level at 100% and it was ongrid. At the scheduled departure time, the cabin was heated but I'm sure for the battery. The battery was on 100% and the regeneration bar was in 1/4.
zice
Posts: 147
Joined: Sat Dec 11, 2021 10:45 am

Post by zice »

mdiamantop wrote: Sun Jan 23, 2022 9:18 pm
zice wrote: Thu Jan 20, 2022 3:46 pm change of plans. I don't need as urgently data from 0795, but rather looking for someone with a 11 or 22kW threephase wallbox. No OBD reader necessary. @chilliboy_123 what wallbox power you have?
I have a 22kw 3 phase wallbox. My car is Enyaq iv60, no heat pump.
I've set departure time a couple of times, the temp was around 0 oC, the charge level at 100% and it was ongrid. At the scheduled departure time, the cabin was heated but I'm sure for the battery. The battery was on 100% and the regeneration bar was in 1/4.
do you have an obd reader?
if it didn't regen fully after start, means battery was not warmed up, that's the hint.
full regen is enabled when battery is warm, either preconditioned or after driving for a while.
mdiamantop
Posts: 24
Joined: Sun Jan 23, 2022 9:03 pm

Post by mdiamantop »

The battery was on 100% so the regen bar wouldn't be full even if the battery was warm. I don't have an obd. I'll try to set a departure time with battery at 80%
Post Reply

  • You may also be interested in...
    Replies
    Views
    Last post